Supplier prices, quotes and sourcing per product
Record each supplier's prices with their own price breaks, accept quotes into those prices, and choose the cheapest supplier per part for a product at a batch size.
Section 01
Supplier offers and price breaks
2 minutes
Each row on a part's Suppliers tab is an offer: what one supplier sells that part for. Add supplier offer (or the pencil on a row) opens a side panel with their part number, a link to the part on their website, the manufacturer and its part number, the currency they quote in, minimum order, pack size, lead time and valid-until date — and the price breaks, at whatever quantities that supplier uses. Every supplier can have different breaks.
| Field | How it is used |
|---|---|
| Price breaks | The price at a quantity is the break with the highest "from" quantity at or below it; below the first break, the offer's own price. Below the minimum order there is no price at all — they won't sell that few. |
| Prices are per N | Type a supplier's "£3.20 per 100" as it is; it is stored per stock unit (0.032), to six decimal places. |
| Minimum order / pack | What you would actually have to buy: at least the minimum, rounded up to whole packs. |
| Status | Quoted — a firm quote you hold. Listing — their public price. Estimate — your own figure, shown everywhere as Potential — estimate and never used to choose a supplier. |
| Valid until | Past this date the offer shows expired and is never suggested. There is no age-based staleness rule beyond the supplier's own date. |
Section 02
Supplier quotes
2 minutes
Record a quote as the supplier sent it: their reference, the date received, valid-until, currency, optionally the product and build quantity it was asked for, notes and the PDF. Each line is one price for one part; several lines for the same part at different "from" quantities are its price breaks.
Nothing changes on your parts until you press Accept. Accepting writes each part's offer from that supplier — creating it if needed, replacing its breaks, marking it Quoted with the quote's currency and valid-until — and the offer then shows from quote … with a link back. The accepted quote is locked as the record; when the supplier re-quotes, add a new quote. An expired quote can't be accepted.
Section 03
Sourcing a product
3 minutes
Enter a batch size. For every bought part in the bill of materials — sub-assemblies included, phantoms blown through — you see what the batch needs, what each supplier would make you buy (minimum order, packs) and what that costs, converted to your books currency at today's rate. A missing rate is shown, never guessed.
| Action | What it does |
|---|---|
| Choose | The radio button on an offer: this product buys this part from this supplier. Per product — the same part can come from different suppliers for different products, and the preferred supplier MRP uses is unchanged. |
| Suggest cheapest | Fills every part you haven't chosen by hand with the lowest line total for the batch — a cheap unit price behind a 10,000 minimum is not cheap for 50. A tie goes to the shorter lead time. Estimates and expired offers are never picked; a cheaper estimate is flagged potentially cheaper: get a quote. |
| Set as standard cost | Runs the cost roll-up (labour, overhead, sub-assemblies) with each part at its chosen supplier's price and saves the product's cost with a cost-history entry. A part with no supplier chosen uses its own cost, labelled; only a part with neither blocks it. |
Material per unit prices what one unit uses at the batch's price breaks. To buy the batch is the cash for the whole order, including anything bought only to reach a minimum order — that surplus stays in stock, so it isn't loaded onto the unit cost.
Section 04
On purchase orders
1 minute
A purchase order prices each line from that order's supplier's offer at its minimum order quantity, converted to the order's currency — not from whichever supplier is preferred. When that supplier has no offer for the part, the preferred supplier's price is used. Changing the supplier on a new order re-prices its lines; the prices on an existing order are never changed.
Raising draft purchase orders straight from a product's sourcing; reaching a better break by combining several products' quantities; MRP using the per-product choices.